Read the articles and stories about Taylor Devices, Inc from around the web.
Please feel free to browse through the articles below from many of the top organizations and groups in the shock and vibration industry.
This article in Modern Steel Construction from AISC was written to give engineers advice on designing buildings for seismic energy dissipation using fluid viscous dampers and ASCE 7 alternative procedures.
This article in Modern Steel Construction from AISC was written to give engineers advice on designing buildings for seismic energy dissipation using fluid viscous dampers and ASCE 7 alternative procedures.
An innovative retrofit using Taylor Devices’ seismic dampers has prepared the nearly 90-year-old Robert A. Young Federal Building in St. Louis for the future. Despite extensive work within the 1 million sq ft structure, the building remained fully occupied throughout the roughly two-and-a-half-year construction phase.
Fabricated by The Herrick Corporation (AISC Member, AISC Certified), 181 Fremont is the tallest mixed-use building in San Francisco and a new landmark in the city’s skyline.
The San Diego Central Courthouse, designed by Skidmore, Owings, & Merrill LLP, serves as an important civic landmark in downtown San Diego, California.
NASA successfully demonstrated the Orion spacecraft’s launch abort system can outrun a speeding rocket and pull astronauts to safety during an emergency during launch.
The following update is from company president, Alan Klembczyk.
March 20, 2020
To the Customers of Taylor Devices:
Due to the ongoing dynamics of the situation with respect to the Coronavirus, I feel that it is necessary to update our customers yet again. As of today, there has been a significant development for us, so I want to convey our current status.
The Governor of New York State, Andrew Cuomo, today updated his Executive Order mandating that 100% of their workforce stay home, with certain exceptions.
Before explaining how that impacts us, please allow me to clearly state that we continue to monitor and adhere to the advice of the appropriate public health agencies. Our Executive Management team is in continuous communication with each other and we are reacting accordingly to minimize any possible impacts that this situation may cause in satisfying all our customer’s needs.
We continue to follow the Center for Disease Control (CDC), Occupational Health and Safety Administration (OSHA) and the Niagara County Health Department for news and advice on steps that should be followed. We are following the recommendations of those agencies.
Because Taylor Devices provides products and services for defense and national security-related operations supporting the U.S. Government and is a contractor to the US government, we are continuing our operations on a limited basis to support our requirements. This allows us to maintain at least a minimal workforce, including some office staff and some personnel who are supporting manufacturing, assembly, and testing operations.
We have taken substantial measures to allow certain other employees to work from home if their job function allows. Therefore, we are fortunate to be in a position that allows us to maintain many functional aspects of our Company while still practicing cautious measures to inhibit the spread of the Coronavirus.
Please continue to be assured of the following points:
Our Purchasing team is in continuous communication with our suppliers so that we can be updated on any delays that may occur. To date, there still have been no delays in receiving our raw materials, purchased components or outside services that affect our final product.
We are managing this crisis with plans and protocols, which includes the ability for many of our employees to work remotely and seamlessly to support our customers while keeping our employees safe.
Our cleaning service at our factory has stepped up cleaning and disinfecting, especially in high-use areas such as bathrooms and lunchrooms.
We have eliminated non-essential travel.
We have put into place a policy of reporting any personal travel by staff or family members outside of Western New York to Human Resources to determine if any quarantine measures will need to be taken, especially if the travel is to high-risk exposure areas or on cruise ships.
We have added a formal visitor pre-screening process that we now require all visitors that enter our facilities to complete.
Please be assured that Taylor Devices continues to hold a very high standard for all our customers while ensuring the safety of all our employees and our professional associates. Our Sales Staff is always available to answer any questions that you may have, and we will continue to support our customers to the absolute best of our abilities.
Thank you very much for your confidence in us to manage this challenging situation.
Please stay tuned for more updates to come.
