Resources

Technical Papers

World leaders in the field of shock & vibration with over 60 years of industry experience. 

108. Seismic Retrofit of the Tower of Hope – Preservation of a Masterwork of Mid-Century Modernism

The two frame office towers, constructed in the 1970s per the 1967 edition of the UBC, use perimeter reinforced concrete moment frames to resist seismic loading. The buildings are rectangular in plan and have certain characteristics that adversely affect their seismic performance, in particular the presence of a soft-story response at the first floor (approximately 50% taller than typical floors), and limited ductility typical of buildings of that era. Risk analysis showed that for the towers the PML exceeded 20%. Nonlinear response history analysis (NLRHA) of the towers was conducted and showed that in the existing configuration, the story drift ratios (SDRs) at the first floor exceeded 2%, shear hinging of the first floor beams was expected and that the SDRs would need to be reduced to approximately 1.4% for the first floor to limit the extent of nonlinear response. Seismic retrofit included addition of 300-kip viscous dampers in both directions to the first floor of the building.

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

More To Explore

Product Info

1. Application of Energy Dissipating

The design of a structure or mechanism subjected to shock and vibration can be greatly improved by the addition of isolation or damping devices. Improvements Include: Reduced Deflection and Stresses, Reduced Weight, Improved Biodynamics, Longer Fatigue Life, Architectural Enhancement and Reduced Cost.

Read More »
White Paper

2. Bridge Design

This paper reports on a non-linear analysis of a bridge supported on sliding bearings with elastomeric restoring spring and viscous dampers. Results were verified with shake table tests.

Read More »
Product Info

3. Commentary on Corrosion

This document shows designers how to avoid corrosion due to the interaction of different metals and alloys at bimetallic contacts. Section one describes the conditions that lead to corrosion at bimetallic contacts and methods to alleviate it. The tables in Section two show the degree of corrosion likely to occur at bimetallic contacts exposed to atmosphere and water.

Read More »

Investor Information

2020 Q3 Important Links

COVID-19 UPDATE

The following update is from company president, Alan Klembczyk.

March 20, 2020

To the Customers of Taylor Devices:

Due to the ongoing dynamics of the situation with respect to the Coronavirus, I feel that it is necessary to update our customers yet again. As of today, there has been a significant development for us, so I want to convey our current status.

The Governor of New York State, Andrew Cuomo, today updated his Executive Order mandating that 100% of their workforce stay home, with certain exceptions.

Before explaining how that impacts us, please allow me to clearly state that we continue to monitor and adhere to the advice of the appropriate public health agencies. Our Executive Management team is in continuous communication with each other and we are reacting accordingly to minimize any possible impacts that this situation may cause in satisfying all our customer’s needs.

We continue to follow the Center for Disease Control (CDC), Occupational Health and Safety Administration (OSHA) and the Niagara County Health Department for news and advice on steps that should be followed. We are following the recommendations of those agencies.

Because Taylor Devices provides products and services for defense and national security-related operations supporting the U.S. Government and is a contractor to the US government, we are continuing our operations on a limited basis to support our requirements. This allows us to maintain at least a minimal workforce, including some office staff and some personnel who are supporting manufacturing, assembly, and testing operations.

We have taken substantial measures to allow certain other employees to work from home if their job function allows. Therefore, we are fortunate to be in a position that allows us to maintain many functional aspects of our Company while still practicing cautious measures to inhibit the spread of the Coronavirus.

Please continue to be assured of the following points:

  • TDI Management has taken substantial measures to maintain our ability to meet our obligations to our customers while adhering to the recommendations and regulations of government agencies. Our workforce remains confident, high- spirited and healthy. We have a sufficient workforce that have adjusted their work schedules as necessary. We remain confident that we will continue to meet the ongoing challenges that the situation is presenting to us.
  • Our Purchasing team is in continuous communication with our suppliers so that we can be updated on any delays that may occur. To date, there still have been no delays in receiving our raw materials, purchased components or outside services that affect our final product.

  • We are managing this crisis with plans and protocols, which includes the ability for many of our employees to work remotely and seamlessly to support our customers while keeping our employees safe.

  • Our cleaning service at our factory has stepped up cleaning and disinfecting, especially in high-use areas such as bathrooms and lunchrooms.

  • We have eliminated non-essential travel.

  • We have put into place a policy of reporting any personal travel by staff or family members outside of Western New York to Human Resources to determine if any quarantine measures will need to be taken, especially if the travel is to high-risk exposure areas or on cruise ships.

  • We have added a formal visitor pre-screening process that we now require all visitors that enter our facilities to complete.

Please be assured that Taylor Devices continues to hold a very high standard for all our customers while ensuring the safety of all our employees and our professional associates. Our Sales Staff is always available to answer any questions that you may have, and we will continue to support our customers to the absolute best of our abilities.

Thank you very much for your confidence in us to manage this challenging situation.

Alan Signature
Alan Klembczyk
President
TAYLOR DEVICES, INC.

Please stay tuned for more updates to come.

Thank You!

A Taylor Devices Representative will be in touch shortly.

Investor Information

2020 Q1 Important Links