Resources

Technical Papers

117. Prescriptive Design of Damped Moment Frames: Simplifying building design with fluid viscous dampers by using an ICC-approved prescriptive method

Taylor Devices’ dampers are featured on the cover photo of the November issue of STRUCTURE magazine, along with an article about the Taylor Damped Moment Frame™. Written by Nathan Canney, Ph.D., P.E., Konrad Eriksen, and Alan Klembczyk, the article covers everything from an introduction to dampers to how the TDMF™ compares to other LFRS in building performance, loss and recovery time at the DE level.

Share This Post

More To Explore

White Paper

2. Bridge Design

This paper reports on a non-linear analysis of a bridge supported on sliding bearings with elastomeric restoring spring and viscous dampers. Results were verified with shake table tests.

Read More »
Case Study

10. Investigation of Light Pole Base Integrity – Rich Stadium

Light poles at Rich Stadium in Orchard Park, N.Y., were showing incipient failure of their hold-down bolts, due to wind excitation. This paper describes the measures used to alleviate this problem, including the addition of viscous dampers between the stadium structure and a point around one third up on the light poles.

Read More »

Thank You!

A Taylor Devices Representative will be in touch shortly.